Alert One - PIN Codes


What is it?

If your Alert-Guard has a TelPad attached to it, you can set up keypad codes to trigger your relays.

 

Adding PIN Codes

To add a new code, select PIN Codes from the main options menu. From here, click the green ADD CODE button at the bottom of the screen.

On the next page, enter the PIN number you would like to add and a name for the pin.

Next, choose which relay(s) you want to be triggered when the code is entered, and what function(s) you would like the panel to perform. For most uses, setting Relay 1 to Pulse will open and close the gate/door.

If you want this code to be restricted by a time period, tick the box labelled 'Apply Time Period?' and select the time profiles you would like to set this to.

You can also apply an activity alert to the code. To do this, tick the box 'Activity Alert?' and enter the alert number in the box that is displayed.

Once you have filled in all the required info, click the green ‘SEND COMMAND’ button at the bottom of the screen. You will then be taken to your SMS app with a text pre-generated to be sent. Click send on your SMS app to send this info to the panel. You should receive a reply from the panel when the info has been added.

 

Changing PIN Codes

To add a new code, select PIN Codes from the main options menu. From the list shown, select the code you wish to change.

On the next page, select the second radio button labelled 'Change PIN'. You will then see an additional box appear under the original code. Enter your new PIN in this box.

Next, click the green ‘SEND COMMAND’ button at the bottom of the screen. You will then be taken to your SMS app with a text pre-generated to be sent. Click send on your SMS app to send this to the panel. You should receive a reply from the panel when the code has been changed.

 

Deleting PIN Codes

To delete an existing code, select PIN Codes from the main options menu.

In the list, simply swipe left or right on the code you would like to delete. You will then be taken to your SMS app with a text pre-generated to be sent. Click send on your SMS app to send to the panel. You should receive a reply from the panel when the code has been removed.



Was this article helpful?